Rowe StarLink DLW-1, Field Service Manual And Parts Catalog

Page: 113 / 158

Section 10: Operator Screens
21822662 10-17
BACK SAVE UNDO
REMOTE CONTROL SETUP - PARAMETERS
This is the first of three screens. Touch “IR Settings” or “VCU Settings” to access those screens.
Remote Credit enables/disables credits being given by the IR remote and the VCU (volume control unit). ALWAYS
enables remote credit but does not limit how many can be given. NEVER is the factory setting and disables them.
CREDIT POOL limits the number of credits given each week to the value in Weekly Credit Pool. When you touch
a button, it toggles between red and blue. A red button indicates it is selected.
Volume Control “Step Size” sets the amount of volume change each volume up/down key produces. Range is 1 to 5
steps.
To change any value, touch it and the Keypad window will appear on the screen. Follow directions on page 9-30 for
using the Keypad and saving the value(s) you enter.
“Mode Linkage” is factory set to “Independent”, which means normal selections (paid or free), Background Music,
and Autoplay selections have separate volumes and each type can only be adjusted when that type is playing. If you
want to lock Autoplays at a volume, then while an Autoplay is playing, adjust the volume then select “Locked Autoplay”.
If you want Background Music and Autoplay volume to be equal, then select “Linked Back Autoplay” (see
“Adding a BGM Unit”).
“Channel Linkage” links the volume control of the channels together in the following combinations. Each time you touch
a combination, the next choice will appear:
(Ch1, Ch2, Ch3, Ch4) channels 1, 2, 3, 4 linked (factory setting)
(Ch1, Ch2); (Ch3, Ch4) channels 1, 2 linked - channels 3, 4 linked
(Ch1, Ch2, Ch3); (Ch4) channels 1, 2, 3 linked - channel 4 separate
(Ch1, Ch2, Ch4); (Ch3) channels 1, 2, 4 linked - channel 3 separate
(Ch1, Ch3, Ch4); (Ch2) channels 1, 3, 4 linked - channel 2 separate
(Ch2, Ch3, Ch4); (Ch1) channels 2, 3, 4 linked - channel 1 separate
(Ch1, Ch2); (Ch3); (Ch4) channels 1, 2 linked - channels 3 and 4 separate
(Ch1); (Ch2); (Ch3, Ch4) channels 1 and 2 separate - channels 3 and 4 linked
(Ch1); (Ch2); (Ch3); (Ch4) all channels separate (four mono channels)
(Ch1, Ch3); (Ch2, Ch4) channels 1, 3 linked - channels 2, 4 linked
If you change the settings, touch SAVE to record your changes.
BACK SAVE UNDO
FOR STUDIO SOUND ONLY
FOR 2 CHANNEL PREAMP ONLY