Rowe BC-1200 Page 25 Field Service Manual And Parts Catalog Download

Page: 25 / 217

BC-1200/1400 Bill and Coin Changer

1-12

25238802

and

Down Buttons

Increment or decrement the displayed option value. Options that have only two possibilities, such as

and

OFF

are toggled between the two options using either of these buttons.

DENOMINATIONS ACCEPTED

BC-1200

The BC-1200, if so configured, can accept quarters and dollar coins as well as 1, 2, 5, 10, and 20 dollar bills of United
States currency. All of these denominations can be selected in combination with other denominations.

BC-1400

The BC-1400 has all the functions and capability of the BC-1200 (in the previous paragraph), except that it does
not accept coins.

Summary of Contents for BC-1200


























































































































































































































Search results

Summary of Contents for BC-1200

Reviews:

Related manuals for BC-1200

Brands by name

Popular brands

Rowe BC-1200, Field Service Manual And Parts Catalog

Search results

Summary of Contents for BC-1200

Reviews:

Related manuals for BC-1200

Brands by name

Popular brands