Roving Networks WiFly RN-131-EK User Manual Download

Page: 14 / 22

www.rovingnetworks.com

Version 1.32r 10/9/2012

RN -W IFLY -E VAL-U M

APPENDIX A: LEGACY EVALUATION KITS

This appendix provides specifications for legacy Roving Networks evaluation kits. Table 6 provides an overview of the kits.

Table 6. Evaluation Kit Hardware

Hardware

Description

RN-131G-EVAL

RN-134-K

RN-174-K

Evaluation board

Contains the WiFly module and connectors.

For RN-131

module

For RN-131

module

For RN-171

module

USB-to-serial
cable

Links your computer to the evaluation board. Contains
the Prolific chipset.

✔

Null modem

Connects the 10-pin serial cable to the USB-to-serial
cable.

✔

10-pin serial
cable

Connects from the board’s RS-232 header to a DB9
connector.

✔

9-V battery clip

Provides power to the evaluation board (requires a
battery).

✔

Antenna cable

U.FL and reverse SMA connectors.

✔

4” dipole antenna

Reverse SMA connector.

✔

Figure 10 shows the RN-134 evaluation board and pin information. Table 7 describes the LED indicators.

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for WiFly RN-131-EK






















Search results

Summary of Contents for WiFly RN-131-EK

Reviews:

Related manuals for WiFly RN-131-EK

Brands by name

Popular brands

Roving Networks WiFly RN-131-EK, User Manual

Search results

Summary of Contents for WiFly RN-131-EK

Reviews:

Related manuals for WiFly RN-131-EK

Brands by name

Popular brands