RN-131G
rn-131-um.pdf 5/14/2009
www.rovingnetworks.com
Phone 408-395-6539
- 8 -
5.2
DNS Parameters
set dns address <addr>
sets the IP address of the DNS sever. This is auto-set when using
DHCP, so only used used in STATIC IP mode.
set dns name <string>
sets the name of the DNS server
set dns backup <string>
sets the name of the backup DNS server
set dns domain <string>
sets the name of the DNS domain
5.3
FTP Parameters
set ftp filename <file>
sets the name of the file transferred when issuing the ftp get
command. If the file is not found on server the connection will
time out.
set ftp addr <addr>
sets the ftp server IP address.
set ftp user <name>
sets the ftp user name for accessing the FTP server.
set ftp pass <pass>
sets the ftp password for accessing the FTP server.
5.4
IP Parameters
set ip address <addr>
sets the IP address of the WiFly GSX module. If DHCP is turned
on, the IP address is assigned and overwritten during association
with the access point. IP addresses are “.” delimited. Note this is
different from the RN-111b module which is space delimited!
Example:
“set ip a 10.20.20.1”
set ip dchp <0,1>
enable or disable DHCP client. If DHCP is turned on, the IP,
gateway and net mask are assigned and overwritten during
association with the access point.
set ip gateway <addr>
sets the gateway IP address, If DHCP is turned on, the gateway IP
address is assign and overwritten during association with the
access point.
set ip host <addr>
sets the remote host IP address. This command is used for
making connections from the WiFly module to a TCP/IP server at
the IP address <addr>.
set ip backup <addr>
sets a secondary host IP address.
set ip localport <num>
sets the local port number.
