Rovin GH2258, Instruction Manual

Page: 4 / 8

3
TROUBLESHOOTING:
If the unit does not appear to function correctly, unplug the unit and
check the following:
FAULT POSSIBLE CAUSE SUGGESTED REMEDY
The coolbox
doesn’t turn
on (DC plug is
inserted; LED on
the plug does not
glow).
There is no electrical
power from the
12V socket in your
vehicle.
The vehicle ignition might
need to be switched on.
The coolbox
doesn’t turn on
(mains plug is
inserted).
There is no electrical
power from the
mains socket. Try using another mains
socket and check the fuse
in the plug. Replace fuse if
necessary.
The coolbox
doesn’t cool (plug
is inserted, LED
on the DC plug
glows).
The fan or the
cooling
element may be
defective.
This can only be repaired by
a qualified electrician.
The vehicle ignition
is on and the
coolbox is not
working or keeps
switching off
(DC plug is
inserted, LED
on the plug is
not glowing
or not glowing
continuously)
The 12V socket is
dirty or debris is
present. This results
in a poor electrical
contact. If the plug of the coolbox
becomes very warm or hot
in the 12V socket, either the
socket is not clean or the
plug has not been inserted
correctly into the socket.
Remove dirt and debris from
the plug and/ or socket
using a non metallic tool.
The plug has not
been inserted
properly into
the socket, poor
electrical contact. Pull plug out gently from the
socket and re-insert firmly.
Repeat the operation until
the proper position is
found & the plug is aligned
securely in the socket.
The fuse of the 12V
plug has blown. Replace the fuse (8A) in the
12V plug by unscrewing the
tip.
The vehicle fuse has
blown.
Replace the vehicle’s fuse
that protects the 12V socket
(usually 15A). Please refer to
the owner’s manual for the
vehicle.