
Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
800-658-5925
9.) Install the rings of the second sheepskin pad, furry side up, over the
uprights and down onto the crossbars just installed. See the right photo
above.
10.) Install the two #18TAC arms into the uprights and fully seat them. See
the photo below.
11.) Set the completed two-level assembly aside.
12.) Connect the remaining #24TLC legs together with two #17CBC
crossbars as you did when putting together the two-level assembly.
13.) Insert the four #46URP uprights into the upward facing holes of the
#24TLC legs in the same manner used to install the uprights in
the two-level assembly already completed. Refer back to step #4 for
clarification.
14.) Install the rings of one sheepskin pad, furry side up, over the uprights
down onto the crossbars just installed. See the photo below.
15.) Install two #23CBC crossbars into the next higher set of holes in the
uprights to span across the longer faces of the assembly as shown in the
photo below.