Bulb Replacement
183
4
Front fog light
Replacement bulb: H1 55 watt.
Operating tip: It may be
necessary to insert the blade of a
small screwdriver under the
metal flange at the base of the
bulb, and use as a lever to
separate the bulb from the
holder.
Pull the inboard side of the fog light surround away from the
front of the car - see illustration (gentle leverage using a
flat-bladed screwdriver behind the surround may be
necessary).
Remove the three retaining screws and pull the light unit
forward away from the bumper. Twist the bulb holder an
eighth of a turn anti-clockwise to release it from the rear of
the light unit. Holding only the metal part of the bulb, pull to
remove it from the bulb holder.
Care point: If the glass has been
scratched, or contaminated with
oil or perspiration, the bulb may
shatter in use. DO NOT touch the
glass. If handled, clean with
methylated spirits and a clean
cloth.
When replacing the bulb, note that the circular flange has a
flat on one side. The flat must align with the lug on the
matching face of the bulb holder. Similarly, note the three
tabs on the perimeter of the bulb holder (one small and two
large); correct alignment of the tabs will ensure the holder is
replaced the right way round.
H2789
Summary of Contents for Seventy Five
Page 205: ......
