Rover Seventy Five, Owner'S Handbook Manual

Page: 79 / 209

Trip Computer
78
Overspeed (‘Speed limit’)
*
The overspeed warning function is an aid to keeping within
speed limits set by the driver. Press and hold the trip computer
button to increase the set speed by increments of 5 mph (5
km/h). Whenever the set speed is exceeded an audible
warning will sound and the set speed will be displayed in the
message centre.
Once a speed has been set, the warning can be turned on or
off by BRIEFLY pressing the trip reset button (this will not
reset the trip meter).
Warning messages
A warning message will override the trip computer display. If
a warning message is received while the trip computer is in
use, the trip feature will be replaced by the warning message.
Pressing the trip computer button (on the end of the left-hand
column stalk) will return the display to the trip computer
feature that was active before the warning message was
received.
If the fault responsible for the warning message continues to
exist, the trip computer will time out every 20 seconds and
the warning message will be displayed again.