10
VOLUME & CONFIGURATION
________________________
_______________________________________________________
_____________________________________
Volume selection is
immediately active, press
“ENTER” for the Display
configuration and other
important settings
Choose “BATTERY SAVING”
from the volume screen. In ON mode,
if no key is pressed, after 30 seconds,
the display brightness is reduced and
after 5 minutes the meter automatically
turns off. press any key to temporarily
reset the battery save mode.
Touch “CONFIGURATION MENU” then
“METER” in the volume screen and set
the “TIMER OFF” value required. The meter
will turn off after 5, 10, 15 or 30 minutes of
inactivity. Press any key to interrupt the
automatic turn-off.
Settings for battery save mode.
“HDMI OUT” (connector 8): Connect an HDMI cable to automatically send the TFT monitor
pictures to a TV or video projector. The video will only be available on an external display;
“VIDEO IN” (connector 4): Select “EXT” to visualize an external video source.
“VIDEO OUT” (connector 4): Select “ON” to send the pictures of the TFT monitor to a TV or
Video projector. Video will be available on an external display.