background image

6

S

ection

 2 — i

mportant

 S

afe

 o

peration

 p

racticeS

Safety Symbols

This page depicts and describes safety symbols that may appear on this product.  Read, understand, and follow all instructions on the 

machine before attempting to assemble and operate.

Symbol

Description

READ THE OPERATOR’S MANUAL(S) 

Read, understand, and follow all instructions in the manual(s) before attempting to 

assemble and operate

WARNING— ROTATING BLADES 

Keep hands out of inlet and discharge openings while  machine is running. There are rotating 

blades inside

BYSTANDERS 

Keep bystanders, pets, and children at least 75 feet from the machine while it is in operation. 

Stop machine if anyone enters the area.

WARNING— THROWN OBJECTS 

This machine may pick up and throw and objects which can ricochet.

EYE PROTECTION 

Always wear safety glasses or safety goggles when operating this machine.

WARNING— GASOLINE IS FLAMMABLE 

Allow the engine to cool at least two minutes before refueling.

WARNING— CARBON MONOXIDE

Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon 

monoxide, an odorless and deadly gas.

WARNING:

 

Your Responsibility—Restrict the use of this power machine to persons who read, understand and 

follow the warnings and instructions in this manual and on the machine. 

SAVE THESE INSTRUCTIONS!

Summary of Contents for CSV 060





















Reviews: