Engine
52
OIL LEVEL CHECK & TOP-UP
Check the oil level when the car is on level ground with the engine
switched off. If the engine is warm, wait for at least two minutes
before checking the level.
1. Pull out the dipstick and wipe the blade clean.
2. Re-insert the dipstick and withdraw again to check the level.
3. If the level is at or near the ’MIN’ mark, twist to release the oil
filler cap and add oil to bring the level close to the ’MAX’ mark.
4. After adding oil, wait for at least two minutes, then recheck the
level, adding more oil if necessary.
5. Finally, replace the dipstick and filler cap.
DO NOT fill above the ’MAX’ mark!
WARNING!
Driving with the oil level
below the ’MIN’ mark will
damage the engine.
Oil specification:
10W/30 engine oil, meeting
RES.22.OL.G4 or ACEA A2:96.
Suitable for use in
temperatures between
-20
°
C to +30
°
C (if climatic
temperature falls outside these
limits, seek advice from your
dealer).
Most major oil companies
produce engine oils to the
above specification.
Operating Tip ..........
Check the oil when you fill up
with fuel (refuel first, then
check the oil - this allows time
for the oil to drain into the
sump before you check the
level).
H2104
