Machine Setup Procedures
Rovema VPK Operators Manual
3/2000 VPK REV(B) PANELVIEW 600
6-7
Threading a Film Roll
After the film roll is loaded on the film carriage, it can be threaded
through the bagmaker.
To thread the film:
1.
Use the film routing label (located on the side of the bagmaker) to
pull the film through the film carriage and up to the forming collar.
2.
Cut the film at a 45 degree angle.
3.
Slide the pointed end of the film between the forming collar and
the forming tube.
4.
Work the film around the forming collar and down the forming tube.
5.
Use the setup rollers to adjust the angle of the film to match the
angle of the forming collar.
Figure 6.7
Shows the steps used to thread film.
2
3
4
5
