The Hardwire Kit will protect your dashcam from
draining your vehicle’s ba�ery. If ba�ery voltage gets
too low, ROVE Hardwire Kit will stop powering your
camera to save enough power, so you can start your
car for the next �me.
Now once you start to drive your car and when the
ba�ery star�ng to charge and when the voltage
reaches higher than the set cut-off voltage protec�on,
then the hardwire kit will resume it’s func�on normally,
un�ll again the voltage reaches the cut-off level.
The protec�ng voltages are 11.8V / 12.0V/ 12.2V / 12.4V.
12.2V recommended for most users in general driving
condi�ons.
Make sure to test and iden�fy the minimum necessary
ba�ery voltage you will need to start your car for the
next �me before you set to the lowest se�ng.
There are 4 protec�ng bands set in the hardwire kit,
you can switch according to your requirement.
We recommend that you start with the highest se�ng,
and then test and move down each step to find the
happy medium that will give you enough ba�ery power
le� over vs. recording �me between your drives.
a) For 12V Ba�eries
The protec�ng voltages are 23.6V / 24.0V/ 24.4V / 24.8V.
24.4V recommended for most users in general driving
condi�ons.
The
ROVE R2-4K Ul�mate 3-lead hardwire kit - Mini-USB
will iden�fy the lead-acid ba�ery type automa�cally
(12V or 24V) and protect your ba�ery from draining
accordingly.
b) For 24V Ba�eries
11
Mini-USB
Mini-USB
