7
P/N 1011263 Rev. C 12/15
Factory Reset
To reset the unit to the factory default set-
tings, press and hold the LEFT and RIGHT
arrow buttons for 5 seconds until “Factory
Settings Restored” appears on the display.
NOTE:
For ALL Units, this sets the dis-
play temperature to °C (Celsius).
Refer to the “Settings” section of
this manual to change the dis-
play temperature to °F (Fahren-
heit).
Adjusting Toast Quality
When the unit is turned on and ready, you
can adjust the toast quality by pressing the
LEFT and RIGHT arrow buttons on the con-
trol panel. After making an adjustment, test
several products to verify they are toasting
at the desired quality.
NOTE:
This setting is maintained when
the unit is powered off.
NOTE:
If at any time the unit displays
an error message or if it fails to
operate properly, contact the fac-
tory immediately for service.
MAINTENANCE
Daily Cleaning
1. Turn the toaster off. The toaster
enters a cool-down mode and will
automatically shut down when
complete.
NOTE:
You do NOT need to wait for the
cool down to complete.
2. Put on neoprene gloves. Remove
the optional Top Feeder (if present).
Remove the Bun Feeder and Angular
Bun Feeder (Figure 5).
3. Clean the outside surfaces of the
toaster with a paper towel sprayed
with an approved multi-surface
cleaner. Allow to air dry.
4. Wipe the Top Feeder (if present)
and Bun Feeder with a paper towel
sprayed with an approved multi-
surface cleaner. Allow to air dry.
5. Reattach items onto the unit. Plug
the power cord into the outlet. Turn
the unit on.
Figure 5. Bun Feeder
OPTIONAL TOP FEEDER
(PURCHASE SEPARATELY)
BUN FEEDER
Summary of Contents for 9210880
