8
P/N 1011263 Rev. C 12/15
Cleaning and Sanitizing the Belts
(Daily)
1. Turn the toaster off. The toaster
enters a cool-down mode and
automatically shuts down when
complete.
NOTE:
You do NOT need to wait for the
cool down to complete.
2. Put on neoprene gloves. Remove
optional Top Feeder (if present) and
remove the Bun Feeder.
3. Clean the exterior of the toaster
with a paper towel sprayed with
an approved multi-surface cleaner
solution.
4. Remove the Front Conveyor Covers
by lifting up and away from the unit
(Figure 9 next page).
NOTE:
Replace all Belts if any of the
Belts are discolored, torn, or if
any of the Belt snaps are dam-
aged.
NOTE:
Only clean the Belt when it is in
front of the Backing Plate. This
avoids causing damage to the
belt. The conveyors continue
to turn during the cool-down
period, allowing you to clean the
entire Belt.
5. Inspect the front Belt and rear Belts.
Refer to Figures 6, 7, and 8. Replace
all of the Belts if any of them are torn,
folded, discolored, missing snaps, or
damaged in any way.
Continued on page 10.
Belt is torn and folded. Replace all Belts.
Belt is missing snaps and is damaged. Replace all Belts.
WRINKLING
AROUND SNAP
BELT IS WRINKLING/DISTRESSED AROUND SNAPS, Has LOOSE/DAMAGED SNAPS,AND
IS MISSING SNAPS. REPLACE DEFECTIVE BELT
Summary of Contents for 9210880
