5
MAINTENANCE AND LUBRICATION
1.
BEFORE EACH USE,
inspect the general condition of the cart. Check for loose hardware,
misalignment of binding parts, cracked or broken parts, and any other condition that may affect its safe
operation.
2. For convenient storage, the handle can be folded down. To do this, press down on the Locking Bar, then
press down on the Handle.
Note: The Table must be completely lowered before folding down the Handle.
3. Store your Hydraulic cart in a location where it is protected from moisture, dirt and corrosive
atmosphere. Protect it from being damaged from other items being moved in and out of its storage area.
4. Occasionally check the condition of the casters.
5. Occasionally apply light grease to the hinge points of the Scissor Arm Assembly and other pivot points
of the assembly. Wipe off excess grease, as this will attract dirt.
6. If the table could not descend when it is first used, please check if the bottom of pull rod(7) drop out
from the bolt (38a) during transportation or assembly, put it back as below.
7. If the Control Lever does not lower the Lift Table easily, loose the Hex Nut (4) by counterclockwise
direction, slightly adjust the bolt(5) to make sure the control lever could lower the table, then tighten the
Hex Nut(4).
8. AFTER USE, wipe external surfaces of the tool with clean cloth.
Hex Nut (4)
Bolt (38a)
Pull Rod(7)
Bolt (5)
Summary of Contents for 1000-LB
Page 7: ...7 MAIN DIAGRAM PARTS LIST...