16.
Using a 10mm socket, remove the horns and bracket from the truck.
See Photo 13.
17. Using a 10mm socket, remove the horns from the factory bracket. Retain hardware for reuse.
See Photo 14.
17.
Install the horns on the supplied horn bracket using the factory hardware. Tighten using a 10mm socket.
See Pho-
to 15.
18.
Install the horn assembly on the grille using the hardware that was previously installed. Tighten using a 5/32” Allen
and a 7/16” wrench.
See Photos 16 & 17.
19.
Using a flat screwdriver, remove the 4 clips from the bottom of the factory grille.
See Photo 18.
Photo 17
Photo 13
Photo 14
Remove horn assembly.
Photo 18
Photo 15
Photo 16
Install horns on supplied bracket.
Attach horn bracket to grille.
Remove horns from bracket.
Remove lower grille clips.
Summary of Contents for 70213
Page 6: ......
