60
The drive system has the following operating modes:
- Ready for use: The display is illuminated showing the support mode and the bat-
tery level. This signifies that the system is ready for use.
- Standby: If the bike has not moved for approximately 12 minutes the system
puts itself into standby mode.
Carrying out a simple action (e.g. pressing a button or a movement impulse
upon the crank) prompts the system into being ready for use again. After reacti-
vation the system will be in the lowest level of support.
- Sleep mode: The on/off button on the display can directly send the system into
sleep mode. To do so, press the button for
≥
3 seconds. The system will also
automatically place itself in sleep mode after 120 minutes of idleness.
Please note that activating the system from this mode can only be carried out by
pressing the ON/OFF button on the control panel in the direction of motion.
7.7.1.4 Lighting
Briefly press the lighting button. The light indicator on the display will light up.
7.7.1.5 Level of support
The symbols below where the speed is displayed show the level of support cur-
rently selected and is depicted by four squares. The
+
and
–
rocker switches are
used to change between the different levels.
Figure 35: Levels of support
If an empty square is displayed the support is current off. If no mode of assis-
tance is selected the pedal force of the rider is not supported.