7.1 General
The bike should be inspected to check it is complete before every ride. The posi-
tions of the quick release lever and the quick release axle should be checked in
particular, especially if the bike was left unattended. Check whether the correct
resistance builds up in the usual brake lever position before every ride by pulling
both brake levers whilst standing up. The rotation of the front and back wheels
should be inspected. This is particularly important if the wheels have been trans-
ported or secured with a bike lock.
In the event of deviations or abnormalities of any kind you must stop using the
bike and investigate the cause.
After a fall, accident or the bike falling over damage could have oc-
curred which is difficult to detect. It is therefore recommended to
stop using the bike and take it to a ROTWILD authorised retailer for
inspection. Using a damaged bike is deemed to not be in accor-
dance with the intended use.
7.2 Kick stands
It is not permitted to attach a kick stand to ROTWILD models R.C+ HT, R.C+ FS,
R.X+ FS, R.E+ FS and R.G.+ FS
7.3 Total permitted weight
The total permitted weight for ROTWILD models R.C+ HT, R.C+ FS, R.X+ FS, R.E+
FS, R.G+ FS and R.T+ HT is 120 kg. This information is also stated on the type
plate.
54