Rotwild Mountainbike User Manual Download Page 46

45

ROTWILD USER MANUAL

on the end, it is not yetvv possible to 

remove the front wheel. The wheel can 

be removed by unscrewing the ten-

sioning nut on the end of the quick-

release by 3 or four turns.

 

Before you start on removing the 

rear wheel, shift the chain on to the 

smallest rear sprocket. This makes it 

easier to remount the rear wheel later. 

 

Now open the rear quick-releases and 

unscrew the tensioning nut by 3 or 4 

turns.

 

When removing the rear wheel, it may 

be necessary to pull the rear derailleur 

back to allow the wheel to be removed 

more easily 

 

from the axle mounts.

BICYCLE CARE

With your decision to purchase a ROT-

WILD bike you are now the owner of a 

high-quality product that requires regular 

care and attention.

The best protection against damaging en-

vironmental influences is regular washing 

and conservation, in particular when 

using your bike in the winter months. Salt 

and dirt work their way into bearings and 

attack the paint finish of your bike.

 

For washing, use only a soft sponge and 

clear water.

 

Give a final polish with a soft cloth or 

leather. 

 

Repair slight damage to the finish 

immediately. Paint repair sticks are 

part of the accessory kit provided with 

your bike. 

 

When necessary, treat your bike with a 

proprietary conservation and corrosion 

prevention product. 

Please do not use any polish at mat-

te varnish, as this can lead color changes.

Remove the following forms of dirt as 

soon as possible:

 

Traces of sweat

 

Insect remains, bird droppings, resins

 

Oil and grease, tar spots.

Never clean your bike with a steam 

cleaner, a high-pressure water jet cleaner 

or an intense stream of water. Water may 

enter the bearings and may also damage 

the finish of your bike.

Keep your eyes open!

Look out for damage, bending or disco-

louration while cleaning your bike. If in 

doubt about what to do, contact your 

ROTWILD dealer.

Potential accident risk

The brake discs must not come into 

contact with conserving products, oils, 

greases or other lubricants. If this should 

happen, clean your brake discs with bra-

ke cleaner. Have your brake pads checked 

at regular intervals by a qualified profes-

sional bicycle workshop and have them 

replaced if necessary.  

Risk of poisoning

Always store cleaning materials in closed 

containers and out of reach of children. 

Please read the instructions carefully 

before use.

BICYCLE CARE

Summary of Contents for Mountainbike



















































Reviews: