Rottler SG7MTS, Operation And Maintenance Manual

Page: 46 / 111

Section 5 Operating Instructions SG7MTS Manual
www.rottlermfg.com
5-14
SEAT MACHINING SUGGESTED RPM CHART
VALVE SEAT
DIAMETER
SPINDLE
SPEED
INCH METRIC RPM
15/16" 24 175
1.000" 25.4MM 150
1.125" 29MM 150
1.250" 32MM 125
1.375" 35MM 100
1.500" 38MM 100
1.625" 41MM 100
1.750" 44.5MM 100
1.875" 47.5MM 75
2.000" 51MM 75
2.125" 54MM 75
2.250" 57MM 75
2.375" 60MM 50
2.500" 63.5MM 50
Valve Seat Machining Procedure
Seat Pocket and valve guide must be clean to ensure proper fit of the carbide pilot.
Select the correct Carbide pilot for the valve guide ID Diameter
At this point, the spindle and work head should be level according to the position of the cylinder head.
Fit the Rottler Tool Holder and pilot assembly into the spindle cone; make sure to align the locator pins
before you fit it into the spindle adapter and push it until you feel that is lock.
The spindle has been engineered to allow ultra fast tooling changes.
Make sure the that spindle Self locking nut is in the off lock position; line up the two ears of the spindle
adapter and insert into the spindle ISO 30 taper, the locking nut automatically will be on the lock position
To remove turn the self-locking nut to the left position, hold the spindle adapter, it may drop on the
machine table. Damage will result