Rottler SG7, Operation And Maintenance Manual, Page: 36 / 102

Section 5 Operating Instructions SG7 Manual
www.rottlermfg.com
5-6
Lightly tighten the lock levers on the supports to remove any play. Now tighten the clamp on the fine
adjustment screw. Turn the adjustment knob to achieve the exact reading that was observed on the
leveling post. You can now completely tighten both the left and right support locks.
Left to Right Alignment
Obtain the left to right reading from a pilot mounted in a guide in the cylinder head. Now place the level on
the leveling post. Loosen both of the tilt lock levers on each side of the quill housing. Use the tilt adjusting
hand wheel to adjust the reading to be the same as that found on the pilot in the cylinder head. Tighten
the tilt lock levers.