Rotronic LOG-HC2, User Manual

Page: 57 / 60

57
Concat
Delete all data records from the list
Use Delete all to remove all data records from the list .
Delete one data record from the list
Select the data record to be deleted and click Delete line .
2 Enter the name and directory for the new data record
Set the path to the directory using Browse and enter the filename, or use
the input window to do this .
3 Calculating the new data record
Start the calculation process with Start . Cancel the calculation with Stop .
Note:
• Concat creates a straight line between the last
data record of the first curve (T1) and the first data
record of the second curve (T2) .
• If, for the data records to be concatenated, there
are curves that overlap timewise and these have
the same name (same module and sensor names
with the same units), the calculation will be aborted
and a corresponding message* will appear in the
status window .
• If the module names, sen-
sor names or units of the
curves to be concatenated
do not correspond Concat
will be unable to join the
curves and will create two
curves .**
• With Concat you can
superimpose curves with
different module or sensor
names .
* Remove overlap
Use the Cut utility to create an excerpt from a
data record that does not overlap timewise with
the next data record .
**
Modify module names, sensor names and units
Use the Calc utility to match the module names, sensor names and units for
the curves .
p
p1 p1
Time Overlapping
p
Time
New data record
Sensor p1 Sensor p2
p
Time
Sensor p1 Sensor p2
Different sensor
names
p
Time New data record
p
Time Different sensor
names and
start times
p
p1 p1
Time Remove overlap
New data record 3
p
Time T2 T1 T0
Straight line created by Concat