Rotronic LOG-HC2, User Manual

Page: 33 / 60

33
Setup
User settings
To display the configuration saved in the logger select the Basic settings tab
1
and click Read basic settings . The settings are now displayed in the User set-
tings tab .
CAUTION
The changes made in the User settings tab
and its sub-menus will only be transferred to
the logger after clicking Write user settings
2
.
Enter the name
of the logger
Enter date of last calibration
and comment
Check the checkbox in order to enter/change the date, notes
and „Calibrating the sensors“ on page 34 .
Only for analogue inputs: Input of a "warm-up time" to warm-
up analogue sensors before making measurements . A start-up
time of zero = the sensor voltage is always ON .
1
2