- 7 –
______________________________________________________________________
in_hypalm_aw1_v3.doc
Keypad
Temperature Unit
The temperature unit of the HygroPalm AW1 (
q
C or
q
F) is easily changed from the instrument
keypad (see Settings).
Operation
Connect a probe to the HygroPalm AW1 and press on the ON/OFF key. After a brief test and
introductory message, the instrument defaults to the “standard” mode (see Operating Modes).
Measurements appear on the LC display and are updated to the display every 0.75 sec.
HOLD function: to freeze the measurements (Standard Mode only) press briefly on the ON/OFF
key. Press again briefly on the key to return to normal operation.
ON/OFF:
Turns the instrument on or off and also
controls the HOLD function. This key has no
effect when either the AwQuick or the AwE
operating mode is running.
MENU :
Press this key to enter the Function Menu
and select the operating mode, etc. The
different menu items appear on the LCD
message line. Press this key again to exit
the menu
UP / DOWN:
When the menu is active, use these keys to
navigate the menu, make a selection or to
change a number
ENTER:
Use this key to start and stop either the
AwQuick or the AwE operating mode
(if already selected from the Function Menu).
When the menu is active, press this key to
confirm a selection.
Connector for HygroClip digital probe
