- 17 –
______________________________________________________________________
in_hypalm_aw1_v3.doc
Using the AwE Mode
In the AwE mode, the HygroPalm AW1 monitors the water activity and temperature values. When
both values are at equilibrium during a few minutes, the measurement is automatically ended.
Depending both on the product being measured and on the stability of temperature,
measurements typically require 30 to 60 minutes.
When ready to measure:
1.
Press on the
ENTER
key. The display shows:
Note: the numerical values are for illustrative purposes only.
0. 2 9 5
A w
2 4. 8 3
q
C
E 1 0 0 : 0 0 : 0 0 R
After 60 seconds, the trend indicators appear both for humidity and temperature. Two arrows
mean stable signal, as per the settings defined when selecting the AwE mode :
0. 6 8 4
A w
2 4. 8 6
q
C
E 1 0 0 : 0 1 : 0 0 R
current
humidity value
current
temperature value
AwE mode is running
HygroPalm AW1 is in the AwE mode
probe 1
is being displayed
elapsed time
hh:mm:ss
