Rotronic HygroPalm AW1 Instruction Manual Download | Manualshive

Page: 26 / 30

background image

- 26 –

______________________________________________________________________

in_hypalm_aw1_v3.doc

Factors that influence the time taken to reach full equilibrium

In addition to the factors mentioned above, the time required for a measurement at full equilibrium
is obviously very much affected by any change in the temperature of the probe and sample. At full
equilibrium the value both aw and temperature should be stable for several minutes.

When measuring samples with very low water activity, it may make sense to relax the definition of
temperature equilibrium. This should lead to results in a shorter time.

«
...
24
25
26
27
28
...
»

Summary of Contents for HygroPalm AW1































Reviews:

No comments

Related manuals for HygroPalm AW1

TouchPAD TPD Series

Brand: ICP DAS USA Pages: 85

Brand: DAS Energy Pages: 24

Brand: Computer Dynamics Pages: 40

UPC-6210 Series

Brand: IBASE Technology Pages: 65

Brand: Toshiba Pages: 22

Brand: Toshiba Pages: 182

Brand: Eaton Pages: 4

Brand: Xiamen Antai New Energy Pages: 11

TPC6000-C 4 Series

Brand: Nodka Pages: 82

ST-65-UHD-AND-L-005

Brand: Speechi Pages: 7

Brand: LEGRAND Pages: 32

Brand: Terasic Pages: 33

Brand: Canadian Solar Pages: 28

Brand: CORAB Pages: 5

Brand: VarTech Systems Pages: 37

Brand: Optex Pages: 9

KPC-1900 Series

Brand: Quanmax Pages: 47

Brand: Quanmax Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands