E-M-AwTherm-V1.1
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
AwTherm: Water Activity at Controlled Temperature
Instruction Manual for Software
Version 1.1
Document Type
Page
16
Document title
3.3.1
Starting a measurement run
To start a measurement run, at the Top Level screen, select the status field and press ENTER.
Figure 3-14 Select status field
Then use the UP/DOWN touch buttons to and select START, and then press ENTER.
Figure 3-15 Select START and press ENTER
The measurement run will now begin.
At the end of the run, the AwTherm will sound an audible beep (if so configured, see Section 3.2.3)
and hold the values on the screen, displaying FINISHED in the status field.
The following section describes the operation of each mode, AwE and AwQ as a flowchart.
© 2012; Rotronic AG
E-M-AwTherm v1.1
