E-M-AwTherm-V1.1
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
AwTherm: Water Activity at Controlled Temperature
Instruction Manual for Software
Version 1.1
Document Type
Page
10
Document title
Any adjustable parameter can be selected using the UP/DOWN and ENTER touch buttons in the
same manner as described for basic menu navigation. The parameter can be adjusted using the
UP/DOWN buttons and set by pressing the ENTER button.
Please note, by pressing and holding the up or down arrow keys, the speed of any numeric
incrementation will increase (autoscroll).
3.2.3
AwTherm Settings
i)
Device Info
displays the serial numbers of the unit itself, the AirChip Sensor and the firmware
version that the AwTherm is running.
Figure 3-5 Device Info
ii)
Device Settings
; Enable or disable temperature control (on by default), disable the Trend
Indication for temperature (19) and Aw (20) as shown in Figure 6, and configure the Aw measuring
mode: AwE or Aw-Quick (see section , below). Touch buttons can be set to make an audible sound
when activated, contrast adjusted (default optimal setting is 35%), and touchpad sensitivity
adjusted – from a value from 0-5. Please note, if touch pad has poor responsivity, try each
individual setting in turn until best results achieved.
Figure 3-6 Device Settings
© 2012; Rotronic AG
E-M-AwTherm v1.1
