Technical Handbook
Rev. 1.6
WWW.ROTREX.COM
Page 5 of 41
Introduction
Phases 2 and 3 (in red) are the stages where Rotrex expertise is most important since it
is here design feedback can prevent quality and operational issues more effectively.
Therefore, Rotrex strongly recommends doing the following:
A.
Choose the Rotrex supercharger that best suits your application (after identifying
a business opportunity, evaluating the market potential and the development
effort/investment needed). For this purpose, you will find useful information in
Section 3 of this document
B.
Design the main interfaces (bracket, drive, ducting and lubrication systems). For
this purpose, you will find useful information in Sections 4 and 6 of this document
C.
Inform your Rotrex supplier of the outcome of your technical and market analysis.
The purpose is to revise key assumptions to provide constructive feedback aimed
to prevent quality and operational issues. Section 6.5 of this document contains a
form for this purpose
D.
Create a revised base specification based on the feedback and adjust your initial
design accordingly
E.
Create a project plan (including test/validation program and estimated product
launch date) and send a summary copy to your Rotrex supplier in order to
coordinate joint efforts and synchronize key events
F.
Design and implement a proper approval process for the application including
testing and documentation verification ensuring product quality. For this purpose,
you will find useful information in Section 5 of this document
G.
Send regular updates along the process. In case of any doubt or difficulty don’t
hesitate to contact your distributor or Rotrex
Summary of Contents for C15-16
Page 1: ...WWW ROTREX COM...
