© Rototilt Group AB
2018-08-31
Locked position
Check for interference between grapple module and tool.
English
EN
Checking the quick coupler
locking function
Even if the indicator shows the locking
wedge to be in the locked position,
conduct the following checks to make
sure it is correctly secured:
Push the tool forward against the ground;
see figure on left.
In this position, extend and retract the
bucket to check that the locking wedge
has locked the tool correctly.
From the operator’s position, rotate the
quick coupler and check that the lock
wedge/lock pistons have engaged lock
position.
If you are still unsure, exit the cab and
perform a visual inspection.
After a tool change
Check that the quick coupler is securely
locked in the quick coupler attachment.
Always pressurize Rototilt
®
to activate
the lock cylinder.
See
Operating the Rototilt
®
,
quick coupler
in the instructions for use for each control
system
.
Grapple module
Check that the tool used in combination
with Rototilt
®
does not interfere with the
grapple module.
In certain cases, it may be necessary to
adjust the tool.
See instructions for use for the grapple
module
.
2200006_ _7434