© Rototilt Group AB
2018-08-31
Fully retracted
position
English
EN
Before use, make sure nobody is within the base machine’s hazard area. People and property remain at
risk even when the product is used correctly.
At startup
Carry out daily checks;
see Service
.
Check the quick coupler locking function
and make sure it works properly in every
respect.
Maneuver the base machine and tool
using smooth movements. This achieves
greater precision and less wear.
Remain constantly on the lookout for
signs of degraded functions.
Use the quick coupler as intended and
within its capacity limits;
see Limitations
and Technical data
.
!
WARNING!
Faults detected during inspections must be remedied right away
so as not to impair tiltrotator function and reliability.
!
WARNING!
Do not use the tool if the quick coupler is not working properly.
Contact your dealer / maintenance service provider immediately if
you detect faults.
Operation
!
IMPORTANT
- If the attachment can fall or change position
in connection with the procedure, there is a risk of damaging the
attachment and/or the machine coupler.
Attach the tool
Open the coupler and check that the
indication shows that the coupler is open.
Position the coupler so that its coupling
mechanism is correctly aligned with the
tool’s attachment frame.
Now slowly pivot the tool by extending
the bucket cylinder.
Adjust with small shaft or boom
movements if necessary.
Detach the tool
Position the tool horizontally, resting on
firm ground or so that the tool cannot
slide out of the attachment when the
quick coupler locks are opened.
When Rototilt® is pressurised
hydraulically the quick coupler locking
function is opened.
When the quick coupler’s locking wedge/
locking bolts are fully open, the tool can
be detached by slowly retracting the
bucket cylinder.
2200006_ _7434
