Pakscan IIS Technical Manual Issue 1.0
Publication S130E 41
8.5.6 Date and Time Setup
This page shows the state of the internal real-time clock. It is used within the sequence programming where
the sequence requires a time or date action.
The date is displayed in the form Day/Month/Year.
The time is displayed in the form Hours:Minutes:Seconds.
Commands available:
- Set date
- Set time
- Return to previous menu
1
2
MENU
Date
1>Date 05/10/95
Time
2>Time 10:32:00
Setting the date:
On pressing
'1'
, the 'Day' field is cleared and
you can type in a new day. Correct a mistake by
pressing the
'CLEAR'
key. Finish entering the
new day by pressing
'LOAD'
. The 'Month' field
will then be cleared, and so on.
Setting the time:
This is similar to setting the date.
