Keeping the World Flowing
3
2. Introduction
3. Specifications
The Actuator Setting Tool
Pro
v1.1 (BTST v1.1)
combines the legacy IR and IrDA communication
protocols with the latest Bluetooth wireless
technology. IR / IrDA support for older Rotork
products is retained.
The BTST v1.1 can connect to wireless enabled
actuators and related software to configure
missions. Missions are a defined set of tasks
performed by the BTST v1.1 on an actuator.
Different missions can be programmed to the
BTST v1.1 via Insight 2 software.
WARNING:
Use only approved battery types as detailed in
the instructions section below.
Utilisez uniquement les types de piles approuvés,
détaillés dans la section instructions ci-dessous.
WARNING:
Substitution of components may impair
intrinsic safety.
La substitution de composants peut
endommager la securite intrinseque.
WARNING:
Do not open in a hazardous area.
Ne pas ouvrir dans une zone dangereuse.
Enclosure:
IP54
Certification:
I II G
Ex ia IIC T4 Ga
CML 19ATEX2194
2776
IECEx SIR 19.0034
Ex ia
C
®
US
Class 1, Div 1, Group A, B, C, D T4
CSA19CA80005457
Temperature:
Tamb = -30 to +50 ºC
Power supply:
4 x 1.5 V AAA Batteries (supplied and fitted)
Operating range:
Infra-red: 0.75 m (from actuator display window)
Bluetooth: 10 m (from actuator display window)
Enclosure materials:
Polycarbonate resin containing 10% Carbon Fibre, Silicone Rubber.