ROTORCOMP VERDICHTER
Operating Manual - NK 100
7.8
[en] 09/2008
7.8 Maintenance intervals
e
Caution:
The frequency of the maintenance intervals (oil
change, replacement of oil filter, fine separator
cartridge and air filter element) varies depending
on the application and the operating parameters.
Depending on the design of the system, mainte-
nance interval should therefore be specified by the
compressor manufacturer. These must be given
priority. It is advisable to conclude a maintenance
agreement. The following table provides an over-
view of the reference value for the NK 100 screw
compressor module.
Maintenance intervals
(Bh = operating hours)
Maintenance work
See chapter
Before commissioning
Check oil level in separator tank
7.2
Once after 50 Bh
Check oil level in separator tank
Tighten all screw pipe fittings and electrical
screw terminal fittings; check all other con-
nections for firm seating
7.2
Every 100 Bh
Check oil level in separator tank,
top up in case of oil shortage
Check maintenance indicator
7.2
Every 1,000 - 6,000 Bh
depending on application
Recommendation: every 12 months
Replace fine separator cartridge
Carry out oil change
Replace oil filter
Replace filter element in intake air filter
Check system for leaks
System inspection.
7.5.2
7.3
7.4.2
7.6.2
Summary of Contents for NK 100
