temperatures at the top).
How to charge the battery?
Read the user manual for proper battery charging.
Find the charging port and connect the magnetic
connector from the USB cable included in the
box. Make sure that the LED around the charging
port blinks yellow or green. The LED will turn
off when charging is complete.
53
Frequently asked questions
E
S
E
N
9. FREQUENTLY ASKED QUESTIONS
9.1. GENERAL
account subscription for one month. Visit the
website trainingpeaks.com/ROTOR to obtain the
maximum
ROTOR INpower® vs 2INpower® vs INspider?
ROTOR INpower® measures in the spindle power
generated by the left leg. The power value that’s
shown is the result of extrapolation (default
operation to multiply by two) power measured in
the left leg. ROTOR 2INpower® keeps INpower®
technology and adds strain gauges to the drive-side
crank, which allows the measurement of the power
applied by each leg independently.
ROTOR INspider measures in the spider instead of
in the axle or crank, on sequently measuring
combined power produced by the two legs while
pedaling.
The three power meters provide ROTOR’s special
metrics OCA, OCP and TORQUE 360.
What ANT+
TM
devices is ROTOR INspider power
meter compatible with?
They are listed in the ANT+ directory:
http://www.thisisant.com/directory/
Which Bluetooth® Smart devices is ROTOR
INspider compatible with?
Any Bluetooth® Smart device is compatible with
ROTOR INspider, from mobile phones to
computers, with the complete range of Bluetooth®
Smart cycle devices in between.
What am I going to find in the INspider product
box?
When buying an INspider you’ll find, n addition to
the spider power meter, one USB cable for battery
charging, an installation and a UserSoftware manual,
and a TrainingPeaks postcard. Training Peaks has
offered ROTOR customers a free premium
How does ambient temperature affect power
measurements?
Ambient temperature does not positively or negatively
affect how INspider works. INspider gives accurate and
stable power measurement independently of changes
in temperature during a ride (e.g. long climbs with
higher temperatures at the bottom and lower
No. Inadequate handling of the product will
invalidate the warranty.
The only parts that can be disassembled are those
that are involved in installing and uninstalling the
cranks on the bicycle. Read the user manual
carefully before handling the product.
Never try to disassemble the plastic covers that
protect the electronics inside the spider. These
covers ensure sealing too and manipulation could
break the seal.
Can I disassemble the elements of my power
meter?
