Flight Controller Orientation And Connections
Once the FC is in place, fasten it
with one of the provided nuts.
Make sure you have plastic
spacers on the screws, between
the FC, ESC, and frame.
Use electrical tape
to secure the wires
and connectors.
Connect the FC to the ESC
using the supplied cable.
Install the yellow gummies on the FC, then connect the ESC to the FC using the supplied cable.
You can then add 4 more plastic spacers on the screws, and mount the FC on the screws.
The long screws should go through the frame, a spacer, the ESC, another spacer, the FC, and then a nut.
The triangular arrow on the Flight Controller
should face upwards and point to the front of the drone.
The rear of the HD1 has 4 holes in the back,
the front has only 2 holes.
HD1-SF Build
Summary of Contents for HD1-SF Build
Page 7: ......
