Rotolight TITAN X2, User Manual

Page: 32 / 56

32
IN/OUT
This page offers a simple radio button system for users to select the desired input and output configuration for
Titan™. Configure using the touchscreen.
INPUT options are as follows:
LOCAL CONTROLS
Titan™ will ignore inputs from DMX sources and is operated by the local controls.
DMX CABLE
Titan™ will respond to incoming DMX Data from the wired DMX inputs on the selected DMX Base Channel, using
the selected DMX Mode.
WIRELESS DMX
If NETWORK / LUMENRAD is selected, Titan™ will respond to incoming wireless DMX data from the Lumenradio
TimoTwo wireless DMX communications module, on the selected DMX Base Channel, using the selected DMX
Mode. This data can be in Bluetooth or wDMX /CRMX (2.4Ghz WiFi) format.
NB: Please don't confuse the Skyport Frequencies 1-20 (ROTOLIGHT wDMX CHANNELS) and the DMX Base Address
channel, they are two separate things. For SYNC-SFX to work, you will need to configure both to match the Master Titan™.
OUTPUT options are as follows:
SYNC-SFX
Titan™ will wirelessly output special effects in multichannel format so that other slave Titans™ can operate the
same special effect in perfect synchronization, (i.e. Lightning, Fire etc). See "Using Roto-wDMX mode for Master
and Slave operation" (p.31)
WIRELESS
Titan™ will output DMX Data via the selected wireless DMX transmitter (i.e., either LumenRadio or Skyport/
Rotolight wireless DMX)
DMX CABLE
Titan™ will output DMX Data via the Cable DMX port.
NETWORK
You can select either ROTOLIGHT (which uses the Skyport/Roto wDMX protocol), or LUMENRAD ( which is
standard wDMX/CRMX by Lumenradio). Use the UNLINK button to disconnect from a CRMX network before
switching networks.
INPUT OUTPUT NETWORK
LOCAL CTRL
DMX CABLE
WIRELESS
SYNC-SFX
WIRELESS
DMX CABLE
UNLINK
ROTOLIGHT
LUMENRAD