Rotolight TITAN X2, User Manual

Page: 30 / 56

30
DMX INTERFACE
NB - There are ten user programmable radio button presets available to store and recall customised DMX settings
(presets 41-50). Press and hold to store a setup, tap the button to recall the preset. Tap the bank button to access
presets 46-50. These presets can be very handy (even if you only use them to store your DMX Base Address so that
tapping the preset buttons gives you fast access to multiple DMX Base addresses for the Titan™.)
OVERVIEW
This can be scrolled up and down, and provides a snapshot of the key DMX controls
In OVERVIEW the three knobs work as follows : Left and Centre knob = Menu Scroll, Right knob = Value. You can
also use the touchscreen to scroll the OVERVIEW menu items up and down.
The OVERVIEW submenu displays the following key DMX parameters:-
DMX MODE - Rotate the right knob to select your desired DMX Master Mode. Choose from Titan 16 channel/Titan
8 Channel / Rotolight Legacy 2 Channel/ Rotolight Legacy 8 Channel / Arri compatible 24 channel mode / Gemini
10 channel mode
DMX ADDRESS - select the base DMX channel address for this Titan™
ROTO wDMX CHANNEL – NB: this is the same as the Skyport Channel # in the FLASH menu. Choices are channels
1-20
DMX SMOOTHING – this operates on all incoming DMX Data, and introduces smoothing to the data, because
Titan’s DMX interface is so fast, so that fades and transitions are less stepped. Options: OFF/LOW/HIGH
Bluetooth PIN Code – This allows the user to reset the Bluetooth PIN code on the LumenRadio TimoTWO chip.
(This PIN can become locked if set by the ‘CRMX Toolbox’ APP ) so you can use this function to reset the TimoTWO
bluetooth PIN.
DMX MODE
DMX ADDRESS
ROTO wDMX CHANNEL 1
1
TITAN 16-ch