Rotolight AEOS, User Manual

Page: 8 / 40

AEOS has a special technology called ‘Dynamic
Drift Stabilisation’ which maintains the colour
temperature through the entire dimming range.
(‘MENU’) Advanced Operation
You can enter the MENU by pressing both red
control knobs simultaneously or clicking and
holding down the left knob followed by the
right. If you wish to leave MENU at any time, you
can return to the basic operation (BRI / COL) by
pressing both red control knobs together again.
In ‘MENU’, rotating the right knob navigates
through the available submenus, whilst pressing
it takes you back one level. Rotating the right
knob adjusts a setting, and pressing it acts as
enter / trigger / activate depending on the menu
position.
In the MENU there are seven submenus through
which you navigate by rotating the left knob:
‘FLSH’, ‘FADE’, ‘SFX’, ‘FDIM’, ‘CTRL’, ‘TECH’ and
‘DEMO’.
You can enter your desired submenu by clicking
the right knob. And you can leave the selected
function by clicking the left knob. Alternatively you
can return to the basic operation mode (BRI /COL)
at any time by pressing both knobs together at
the same time.
(‘FLSH’) Flash mode
Scroll to ‘FLSH’ click the right knob to enter ‘FLSH’
mode.
In order to use the flash, you must be in Flash
mode indicated by flash duration on the display.
If you see word ‘FLSH’; you are not in Flash mode
and must right click to enter Flash mode.
Set your camera to manual flash mode.
AEOS is not a TTL flash, it is a manual flash with
adjustable flash power, modelling light, colour
temperature and duration settings. Set your
M E N U
FLSH
08