Rotolight AEOS, User Manual

Page: 16 / 40

SFX
‘FADE’ Designer Fade™
Designer Fade ™ creates fade up / fade down
effects for practical in-camera production fade
effects. Scroll to ‘FADE’ and click the right knob to
enter Fade mode.
Rotate the right knob to adjust the fade duration
(up to 12 seconds up or down).
The AEOS will display DN (=fade down) followed by
a numerical value ‘Xs’ where X = seconds
Please note, the fade will be to zero from the
current brightness level the AEOS is set to (i.e. if
brightness is currently 80%, then fade will be 80-
0% over custom time duration).
Both the last used brightness setting and fade
duration parameter are stored in non volatile
memory.
Once you have selected the length of the fade,
click the right knob to perform it (you can also
trigger the fade using an external flash trigger via
via Skyport or the flash sync port). You will notice
the display now shows UP Xs and it will now fade
up to your previous brightness setting over ‘X’
seconds.
If you only want to fade down use the left knob to
click out of FADE and click back in.
Click the left knob to return to MENU, alternatively
you can return to the basic operation menu
(BRI / COL) by pressing both control knobs
simultaneously.
(‘SFX’) CineSFX™
In collaboration with Stefan Lange, DOP and
visual FX veteran, we have created an arsenal of
special FX (CineSFX™). These production tools are
designed to complement your feature/short film or
music video.
Please note, the current brightness level and
16
FADE