Rotolight AEOS, User Manual

Page: 15 / 40

‘SPED’ is displayed. This ensures that Skyport receiving
is active and is in HSS mode. Click the left knob twice to
return to the main menu.
Press the setup button on the right-hand side of the HSS
transmitter.
Scroll using the rotary wheel to ‘Frequency’, and ensure it
is on the desired frequency – we recommend defaulting to
channel 1, however if you happen to encounter interference
from other signals, try changing to a lesser used frequency,
such as channel 20.
To then adjust the frequency, press the button in the
centre of the rotary wheel and scroll to change the
number. Press the centre button to confirm, which also
navigates you back to the main setup menu on the
transmitter.
For users wishing to operate both Elinchrom and Rotolight
units simultaneously using the HSS Transmitter, scroll
using the rotary wheel to ‘ELSP mode’, use the centre
button to enter the mode and scroll to adjust to ‘NORMAL’.
Press the button in the centre of the rotary wheel centre
to confirm. The screen will change to a green background
colour to confirm you are in Normal mode.
If you are only operating Rotolight units via the HSS
transmitter, we recommend using SPEED mode, which
will turn the background colour red.
Then, use the rotary wheel to scroll to ‘SC Setup’ (Second
Curtain). The SC Setup should automatically to default to
the ‘By Camera’ setting. However, for Nikon compatible
HSS transmitters only, ensure the Second Curtain is set to
OFF.
Scroll to Auto MOD and ensure this is set to ‘No Use.’
However, for Nikon compatible HSS transmitters only,
ensure this is set to ‘OFF’.
Scroll to ‘Iden.’ at the bottom of the Setup menu and
ensure this is set to ‘Type’ to display the Rotolight units
correctly during control.
Then scroll to the top of the menu and click Scan, this will
now re-scan for devices and will find the AEOS and display
it in the control menu.
15