Observe regulations for danger warning systems
VDE 0833, guidelines for electrical systems VdS
2221, VDE 0100, DIN 18232 for smoke and heat
vent systems, regulations of the local fire-brigade
and of EVU for connection to mains supply.
Important regulations
Safety notes
Operating voltage 230 VAC!
Risk of injury from electric shock!
- Connection has to be carried out only by an
authorized electrical specialist
- Only for inside mounting
- Just use unchanged original Roto parts
Smoke and heat vent alarm
Malfunction
Mains existing
Vent button function "OPEN"
Smoke-/ vent button function "CLOSE"
Pictogram explanation
D+H window drive
OK
Control panel O.K.
An overdue maintenance of the system will be
indicated by the control panel after about ca. 14 to
16 months. The yellow LED in the control panel and
the smoke vent button will start flashing. A
malfunction of the smoke vent system will be
continually indicated by the extinguished green
control diodes in the smoke vent buttons.
After the maintenance time is expired (ca. 14 to 16
months), the ventilation function OPEN can be
interrupted depending on the presetting of the
service timer.
Attention: Reset of the service timer can be
carried out by a specialist company only, who
has been authorized by the appliance
manufacturer.
Servicetimer
Intended use
- Smoke and heat ventilation control
- In particular for staircases
- Microprocessor based control panel
- 1 line, 1 group
- 3 A actuating current
- Comfort functions for daily ventilation
- Only for inside mounting
Scope of supply
1x
SHEV control panel – ZEL RWA STZ 4503-T
1x
Battery 12 V, 3,4 Ah ±15 %
In the control package
are following
parts additionally included:
1x
SHEV button – ZEL RWA RT 45
1x
Optical fire detector – ZEL RWA FO 1362
ZEL RWA SPA
Assembly scheme
line
group
window drive*
smoke vent button**
SHEV control panel
vent button*
fire detector**
rain sensor*
external control*
OK
* optional accessories (not included)
** see scope of supply
ZEL RWA STZ 4503-T
English
99.824.61 1.2/06/11
24/84
