Roto-Mix 274-12 Page 5 Operation And Parts Manual Download

Page: 5 / 69

OPERATOR QUALIFICATIONS

Operation Of this mixer/feeder shall be limited to competent and experienced persons.

In addition, anyone who will operate or work around a mixer/feeder must use good common
sense. In order to be qualified, he or she must also know and meet all other qualifications, such
as:

1. Some regulations specify that no one under the age of sixteen (16) may operate

power machinery. It is your responsibility to know what these regulations are in
your area and/or situation.

2. Current OSHA regulations state in part: At the time of initial assignment and at

least annually thereafter, the employer shall instruct

EVERY

employee in the safe

operation and servicing of all equipment with which the employee is, or will be
involved.

3. Unqualified persons are to

STAY OUT OF THE WORK AREA.

4. A person who has not read and understood all operating and safety instructions is

not qualified to operate the machinery.

FAILURE TO READ THIS MIXER/FEEDER MANUAL AND ITS SAFETY

INSTRUCTIONS IS A MISUSE OF THE EQUIPMENT.

SAFETY

READ BEFORE

YOU FEED

SAFETY

READ BEFORE

YOU FEED

SAFETY

READ BEFORE

YOU FEED

Summary of Contents for 274-12






































































Search results

Summary of Contents for 274-12

Reviews:

Related manuals for 274-12

Brands by name

Popular brands

Roto-Mix 274-12, Operation And Parts Manual

Search results

Summary of Contents for 274-12

Reviews:

Related manuals for 274-12

Brands by name

Popular brands