25
TROUBLE SHOOTING
ALWAYS DISCONNECT OR DISENGAGE POWER TAKE OFF AND REMOVE
KEYS FROM TRACTOR BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING
THIS MACHINE. FAILURE TO FOLLOW THIS RECOMMENDATION MAY RESULT IN
SERIOUS PERSONAL INJURY OR DEATH.
NOTE:
THIS CHART DOES NOT COVER ALL PROBLEMS. CONTACT YOUR DEALERSHIP
FOR FURTHER ASSISTANCE.
PROBLEM
POSSIBLE CAUSE
POSSIBLE REMEDY
Machine Vibration
Universal Joints Are Out Of
Alignment.
Check And Realign.
Worn Out Bearing.
Replace Bearing.
Excessive Bearing Failure
Improper Lubrication
Refer To Lubrication Chart.
Contamination
Check Seal
Excessive Loads.
Refer To General
Information About
Machine Loading.
Mixing quality poor, not
thorough.
Batch has high
concentration of light
weight ingredients and
rotates too fast inside tub
for thorough mixing.
Extend restrictor plates
(dogs) further into tub as
instructed under loading
instructions and
precautions.
High concentration of
long hay, not being torn
apart.
Extend restrictor plates
(dogs) further into tub as
instructed under loading
instructions and
precautions.
Hay being added to
batch, but not being
incorporated into mixture.
Hay not getting shredded
by mixing action, batch
rotating inside tub too fast.
Extend restrictor plates
(dogs) further into tub as
instructed under loading
instructions and
precautions.
Too much power being
consumed to mix.
Restrictor plates extend
too far into tub and
retarding rotation of
batch.
Move restrictor plates
(dogs) away from tub as
instructed under loading
instructions and
precautions.
