24
LUBRICATION CHART
ALWAYS DISCONNECT OR DISENGAGE POWER TAKE OFF AND REMOVE
KEYS FROM TRACTOR BEFORE ADJUSTING, LUBRICATION OR SERVICING THIS
MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
ITEM
LUBRICATION
INTERVAL
Conveyor Chain
Light Weight Oil
Brush or spray on lightly every 40
hours of operation.
Conveyor Bearings Good Quality Grease
One pump every 8 hours of
operation.
PTO (Slip Shaft)
Good Quality Grease
Every 8 hours
IMPORTANT: At each lubrication
make sure the slip shaft slides in
and out freely, failure of the shaft
to slide freely will result in drive
train damage.
Wheel Bearings
90w Gear Lube
Inspect daily for leaks.
U-Joint
Good Quality Grease
Every 8 hours
CV-Joint
Good Quality Grease
Every 8 hours
Auger T Gearbox’s Synthetic Gear Lube
75W-90
After the first 100 hours of
operation. Thereafter oil should be
changed every 2000 hours or 12
months, whichever comes first.
With severe usage every 1000
hours or 6 months.
Speed Increaser
Gearbox
Synthetic Gear Lube
75W-90
After the first 500 hours of
operation, then 2000 hours or
every 12 months, whichever
comes first.
Reservoir Oil Filters
24 hours after start up of the
system. Thereafter normal
maintenance every 500 hours of
service.
Automatic
Transmission Oil
and Internal Filter
Recommended oil for
ambient temperatures of:
0° F to 110°F
30 WT C-4 Spec.
-10°F to 60°F Dextron II
Transmission Fluid
Every 1000 hours or 12 months of
operation, whichever comes first.
Approximate capacity is 7 gal.
External
Transmission Filter
Lube filter gasket when
changing filter
Every 500 hours.
