manualshive.com logo in svg

Roto Frank C600, Installation Maintenance And Operating Instructions, Page: 23 / 64

Share
Download
Roto Frank C600 Installation Maintenance And Operating Instructions Download Page 23

Subject to change.  

Roto Safe C | C600 | C600 – Tandeo | H600 

IMO_457_DE_v0 

 July 2017 

 

23

Installation

Screw connections

Screw connections 

DANGER
Incorrectly installed or screwed-in hardware components present a danger to life.

Installing and screwing hardware components into place improperly may lead to hazardous situations and 
cause serious accidents or even death.

 

f

During installation and screwdriving work in particular, observe the specifications provided by the profile 
manufacturer.

 

f

Use the screws specified.

 

f

Note the torques.

CAUTION!
Over-tightened screws may cause property damage.

Over-tightened screws lose their hold and no longer provide the necessary strength.

 

f

Note the torques.

 

f

Do not over-tighten screws.

CAUTION!
Protruding screw heads may cause property damage.

Protruding screw heads can damage adjoining materials.

 

f

Tighten screw heads until they are flush with the surface.

INFO

The length of the fixing screws must be selected according to the profiles used.

The manufacturer must ensure that the hardware components are adequately secured and if necessary contact  
the screw manufacturer. Do not use any acid cross-linked sealing compounds that could lead to corrosion of the 
hardware components.

Screw connections for PVC

 

WARNING
Incorrect screw connections may lead to serious injuries. 

Short screws will not reach the steel reinforcement and will therefore not hold.
Hardware components can be pulled out of the sash if they are not screwed into the steel reinforcement.

 

f

Select the length of the screws so that they will hold in the steel reinforcement.

Fasten hardware components using electrogalvanised and passivated steel fixing screws. Use fixing screws with 
additional sealing in more challenging climatic conditions.

Screw connections for wood

 

WARNING
Incorrect screw connections may lead to serious injuries.

Fasten hardware components using electrogalvanised and passivated steel fixing screws. Use fixing screws with 
additional sealing in more challenging climatic conditions.

Summary of Contents for C600

































































Reviews:

No comments