ENGLISH
32
Enter the temperature and press the Enter button. The following appears if the temperature
was not entered correctly:
Pressing the arrow key causes the machine to start up; pressing EXIT causes the programme
to spring into the main menu without saving.
Place the electrical cutting unit between the two work pieces to be welded.
P250-355/8-12B:
Switch on the miller motor and lock the switch in place.
P500-630/18-24B Plus: Verify the direction of rotation! The machines were polarised
to turn clockwise before leaving our factory!
Turn on the cutting unit, press buttons
(10)
and
(5)
on the hydraulic unit. The cutting disks
must run in the cutting direction. If they don‘t, use an appropriate tool to switch the phase
inverter on the electrical plug.
Risk of serious injury! During operation trimmer unit, stay a safe distance away
from the machine, and do not reach into the rotating knife. Use trimmer in
working position only and return it into the designated carrying frame
immediately after use. Ensure that the safety switch functions properly at all
times to avoid any accidental starting of the trimmer away from the basic
machine.
