Extinguish
3.2
Move the ON/OFF switch to the OFF position to extinguish the torch.
Gas Torch
Ignition and extinguishing of the gas torch
4.1
Move the ON/OFF switch to the ON position to release the gas.
4.2
Light the torch by placing an open flame next to the Torch nozzle.
4.3
Move the ON/OFF switch to the OFF position to extinguish the flame.
Hot Blower
Dissemble the Soldering tip by screwing the spring loaded tip
adapter counterclockwise.
The assembly without the soldering tip can be used as a Hot Blower.
Operation will be the same as above for the soldering iron.
Flame adjustment
Move the gas volume control lever toward “+” position to increase the
flame strength or “-“ position to decrease the flame strength.
When the flame is at “+” position, the longer flames may cause the
torch to flare or extinguish. In this situation, please move the gas
adjustment lever to “-” side for decreasing the flame strength and set
up a most efficient flame.
