16
ENGLISH
Immediately remove any possible drilling cores and drilling core remains from the bore
crown each time after drilling before this becomes caked together.
Only use clean water (tap water) to fill the pressure tank.
Attention! Relieve the tank pressure first!
Only use diamond drill bits that have been tested by ROTHENBERGER.
To some extent, commercially available diamond bore crowns from third-party manufacturers
feature excessive true-running inaccuracy. Problems arise for this reason when starting up on
damageable surfaces and in addition to these precision boreholes are not possible.
5
Care and Maintenance
Clean carefully after drilling has been finished and blow out using compressed air. Lightly lubri-
cate screws and thread.
Flushing head: drain off water, blow out and oil the thread lightly.
Remove all water and grease from the hand grip.
Important!
All maintenance, overhauling and repair work must only be carried out by trained
specialised staff.
6
Accessories
Accessory Name
ROTHENBERGER Part Number
Quick change adaptor G 1/2"
FF35751
Freehand drill support up to
Ø
83 mm
FF35750
Freehand drill support up to
Ø
43 mm
FF35749
Special water supply hose
FF35301
Water supply hose with “aqua-stop”
FF35302
Pressurized water container 10 l
FF35028
Drill stand RODIACUT 150
FF30150
Drill stand RODIACUT 250
FF30250
7
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using Ro online:
Phone:
+ 49 (0) 61 95 / 800 – 8200
Fax:
+ 49 (0) 61 95 / 800 – 7491
Email:
www.rothenberger.com
8
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EU the disposal of electrical and electronic equipment and its im-
plementation as national law, electric tools that are no longer serviceable must be
collected separately and utilised for environmentally compatible recycling.
